點擊圖片放大商品名稱:
詳細介紹:
E2M0.7
詳細介紹:E2M0.7
規格介紹:
Displacement (swept volume) 50 Hz | 0.9 m3h-1 / 0.5 ft3min-1 |
Displacement (swept volume) 60 Hz | 1.1 m3h-1 / 0.6 ft3min-1 |
Speed (Pneurop 6602) 50 Hz | 0.75 m3h-1 / 0.4 ft3min-1 |
Speed (Pneurop 6602) 60Hz | 0.95 m3h-1 / 0.5 ft3min-1 |
Ultimate vacuum (total pressure) | |
without gas ballast | 3.0 x 10-3 mbar / 2.3 x 10-3 Torr |
with full gas ballast | 2.0 x 10-1 mbar / 1.5 x 10-1 Torr |
Inlet connection | NW10 flange |
Outlet connection | Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole |
Maximum permitted pressure at outlet | 0.5 bar gauge / 7 psig |
Maximum inlet pressure for water vapour | 15 mbar / 11 Torr |
Maximum water vapour pumping rate | 8 gh-1 |
Motor power | 0.09 kW |
Nominal rotational speed 50/60Hz | 1400/1700 rpm |
Power connector | IEC EN60320 C13 |
Operating temperature range | 12 - 40 °C |
Weight, without oil | 10 kg / 22 lbs |
Noise | 43 dB(A) @ 50 Hz |
Noise with acoustic enclosure | 36 dB(A) @ 50 Hz |
Oil capacity - maximum | 0.28 litre |
Oil capacity - minimum | 0.2 litre |
Recommended oil (supplied) | Ultragrade 15 |
更多商品
E2M80
Displacement 50Hz 80 m3h-1 / 47.1 ft3min-1 60Hz 96 m3h-1 / 56.5 ft3min-1 Speed (Pneurop) 50Hz 74 m3h-1 / 43.6 ft3min-1 60Hz 90 m3h-1 / 53 ft3min-1 Number of stages 2 Ultimate vacuum Without gas ballast (total pressure) 1 x 10-3 mbar / 7.7 x 10-4 Torr With gas ballast (partial pressure) 5 x 10-3 mbar / 3.8 x 10-3 Torr Ultimate with Fomblin® Without gas ballast 1 x 10-2 mbar / 7.7 x 10-3 Torr Inlet connection ISO40 Outlet connection 25 mm flange suitable for NW25 Max outlet pressure 0.5 bar gauge Max inlet pressure for water vapour 5 mbar / 3.8 Torr Max water vapour pumping rate 0.3 kg h-1 / 0.7 lb h-1 Weight 102 kg / 224 lb Motor protection rating IP55 Motor power 50Hz 2.2 kW / 3 hp 60Hz 3 kW / 4 hp Standard oil capacity maximum 6.3 litre minimum 4 litre PFPE oil capacity maximum 4 litre minimum 2.2 litre Recommended oil Ultragrade 70 PFPE prepared version Fomblin® Y06/6 Noise level 70 dB (A) Hydrocarbon Prepared - HC Standard pump for use with Ultragrade oil. Oil supplied with the pumpPFPE Prepared - FX These pumps are assembled and tested using PFPE fluid. PFPE (Fomblin®) to be purchased separatelyAzide Compatible - AZ Similar to hydrocarbon pumps but with copper and brass parts replaced with other suitable materials such as stainless steel. Supplied with Ultragrade oil.
E2M40
Displacement 50Hz 42.5 m3h-1 / 25 ft3min-1 60Hz 50.5 m3h-1 / 29.7 ft3min-1 Speed (Pneurop) 50Hz 37 m3h-1 / 21.8 ft3min-1 60Hz 44 m3h-1 / 25.9 ft3min-1 Number of stages 2 Ultimate vacuum Without gas ballast (total pressure) 1 x 10-3 mbar / 7.7 x 10-4 Torr With gas ballast (partial pressure) 5 x 10-3 mbar / 3.8 x 10-3 Torr Ultimate with Fomblin® Without gas ballast 1 x 10-2 mbar / 7.7 x 10-3 Torr Inlet connection ISO40 Outlet connection 25 mm flange suitable for NW25 Max outlet pressure 0.5 bar gauge Max inlet pressure for water vapour 7 mbar / 5.3 Torr Max water vapour pumping rate 0.2 kg h-1 / 0.4 lb h-1 Weight 75 kg / 165 lb Motor protection rating IP55 Motor power 50Hz 1.1 kW / 1.5 hp 60Hz 1.5 kW / 2 hp Standard oil capacity maximum 4 litre minimum 2.2 litre PFPE oil capacity maximum 4 litre minimum 2.2 litre Recommended oil Ultragrade 70 PFPE prepared version Fomblin® Y06/6 Noise level 65 dB (A) Hydrocarbon Prepared - HCStandard pump for use with Ultragrade oil. Oil supplied with the pumpAzide Compatible - AZSimilar to hydrocarbon pumps but with copper and brass parts replaced with other suitable materials such as stainless steel. Supplied with Ultragrade oil.PFPE Prepared - FXThese pumps are assembled and tested using PFPE fluid. PFPE (Fomblin®) to be purchased separately
E2M28
Displacement (swept volume) 50 Hz 32.2 m3h-1 / 19 ft3min-1 60 Hz 38.9 m3h-1 / 22.3 ft3min-1 Speed (Pneurop 6602) 50 Hz 27.5 m3h-1 / 16.2 ft3min-1 60Hz 33.0 m3h-1 / 19.5 ft3min-1 Ultimate vacuum (total pressure) without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr with gas ballast 1.5 x 10-2 mbar / 1.1 x 10-2 Torr with Fomblin® 1 x 10-2 mbar / 7.5 x 10-3 Torr Inlet connection NW25 flange Outlet connection** Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole Max allowed pressure at outlet 0.5 bar gauge / 7 psig Max inlet pressure for water vapour 30 mbar / 23 Torr Max water vapour pumping rate 0.7 kg h-1 Operating temperature range 13 – 40 °C Nominal rotation speed 1440 / 1720 rpm Motor power 50 Hz 0.75 kW Motor power 60 Hz 0.90 kW Power Connector 1-ph* IEC EN60320 C19 Weight 44 kg / 97 lbs Noise 57 dB(A) @ 50 Hz Oil capacity - max 1.5 litre Oil capacity - min 1.2 litre Recommended oil (supplied) Ultragrade 19 * Pumps listed with IEC connector only** The FX are supplied with NW25 outlet connection
E2M18
Displacement (50Hz) 20.5 m3h-1 / 12.1 ft3min-1 Displacement (60Hz) 25.0 m3h-1 / 14.7 ft3min-1 Speed (Pneurop 6602) 50 Hz 17.0 m3h-1 / 10 ft3min-1 Speed (Pneurop 6602) 60Hz 20.4 m3h-1 / 12.1 ft3min-1 Ultimate vacuum (total pressure) without gas purge 1 x 10-3 mbar / 7.4 x 10-4 Torr with gas purge 1.5 x 10-1 mbar / 1.1 x 10-2 Torr with Fomblin® 1 x 10-2 mbar / 7.5 x 10-3 Torr Inlet connection NW25 Outlet connection** Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole Max permitted pressure at outlet 0.5 bar gauge / 7 psig Max inlet pressure 20 mbar / for water vapour 15 Torr Max water vapour pumping rate 0.3 kg h-1 Operating temp range 13-40°C Nominal Rotation speed 50/60Hz 1440/1720 rpm Power connector 1-ph* IEC EN60320 C19 Motor power 50 Hz 0.55 kW Motor power 60 Hz 0.75 kW Weight 39 kg / 86 lbs Noise @ 50Hz 57 dB(A) Oil capacity - max 1.05 litre Oil capacity - min 0.75 litre Recommended oil (supplied) Ultragrade 19 * Pumps listed with IEC connector only* The FX are supplied with NW25 outlet connection
E2M1.5 100-120 V, 50/60 Hz P/N：A37132902
Displacement (swept volume) 50 Hz 1.8 m3h-1 / 1 ft3min-1 60 Hz 2.2 m3h-1 / 1.3 ft3min-1 Speed (Pneurop 6602) 50 Hz 1.6 m3h-1 / 0.8 ft3min-1 60 Hz 2.0 m3h-1 / 1.2 ft3min-1 Ultimate vacuum (total pressure) without gas ballast 3 x 10-3 mbar / 2.3 x 10-3 Torr with gas ballast 2.5 x 10-2 mbar / 1.9 x 10-2 Torr Inlet connection NW10 flange Outlet connection Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole Maximum permitted pressure at outlet 0.5 bar gauge / 7 psig Maximum inlet pressure for water vapour 15 mbar / 11 Torr Maximum water vapour pumping rate 16 gh-1 Motor power 50/60 Hz (IP54) 0.16 kW Nominal rotation speed 50/60Hz 2800/3400 rpm Power connector IEC EN60320 C13 Operating temperature range 12 - 40 °C Weight 10 kg / 22 lbs Noise 54 dB (A) @ 50 Hz Noise with acoustic enclosure 47 dB(A) @ 50Hz Oil capacity - max 0.28 litre min 0.2 litre Recommended oil (supplied) Ultragrade 15
